SIMWORKS Stainless Outer Cable for Brake - 3m
Nissen Cable uses stainless steel coil wire for the outer cable, which is generally made of steel, making it rust-resistant and finished with a transparent coating. A polyethylene inner liner is placed inside the coil, making the lever pull lighter. The outer diameter of the shift cable is 4 mm, and the inner wire is compatible with 1.2 mm.
Considering the need for more diversified cable management to avoid interference with the frame's full outer design and gear such as bags and racks, SimWorks uses a 3m cable length instead of the standard 2m. This means there is almost no need to worry about the cable being too long when assembling.
[Installation method to maximize the performance of the outer cable]
- Before installation, leave the outer cable in a straight position for half a day to a day to remove any initial shrinkage before use.
- For cutting, use an outer cut guide or a high-precision wire cutter.
- After cutting, the coating and coil are deburred and the liner tube is drilled.
- Fluorine-based oil or silicone-based oil is applied to the inner cable.
[SPEC]
| length : | 3m |
| Outer diameter: | 5mm |
| Compatible inner wire diameter: | 1.5 - 1.6 mm |
| material : | Coil / Stainless steel inner liner / Polyethylene |
| Contents: | Outer cable x 1 Chrome plated outer cap x 4 |
*If you are looking for a sharp lever touch in combination with brakes that have high braking performance, we recommend the CRISPER model .